NurseryPro UltraKlean Filters
This filter can be used above-ground or partially buried in
the ground up to the filter inlet fitting.
How does it work? As the pond water enters the UltraKlean filter, it is forced into a cyclone action and through a special density foam filter. The large foam surface provides increased filtration and bacteria growth. Because the water is pressurized, the foam is able to fill with more beneficial bacteria without becoming blocked. Clean water then moves down the outside of the foam filter into the biomedia at the bottom of the filter container where more beneficial bacteria clean the pollutants out of the water.
To ensure maximum circulation through the filter, it is best to keep the hose short and the pumping height to a minimum, especially on the discharge side of the filter.
-
Ultraviolet clarifier for algae control.
-
Cyclone action increases efficiency.
-
Triple action foam works from top, bottom and sides to minimize cleaning requirements.
-
Large foam surface provides increased filtration and bacteria growth.
-
Plastic bio-media layer enhances beneficial bacterial action.
-
Large band clamp for easy opening.
-
LED indicator tells when filter should be cleaned.
-
Convenient inlet/outlet hose tails accommodate ¾ inch to 1½ inch tubing.
|
Pressurized Filters without UV |
Pressurized Filters with UV |
|
1000 GPH Pressurized Filter Maximum volume: 1000 gallons Maximum flow rate: 750 GPH Maximum fish stock: 100 inch, per 1000 gallons |
1500 GPH Pressurized UV Filter Maximum volume: 1500 gallons Maximum flow rate: 1000 GPH Maximum fish stock: 150 inch, per 1000 gallons |
|
2500 GPH Pressurized Filter Maximum volume: 2500 gallons Maximum flow rate: 1500 GPH Maximum fish stock: 250 inch, per 1000 gallons |
2500 GPH Pressurized UV Filter Maximum volume: 2500 gallons Maximum flow rate: 1500 GPH Maximum fish stock: 250 inch, per 1000 gallons |